Description
Bring Your Flyers to Life
The Flyer Pole Kit adds wind-powered motion to Deadly Decoys® flyer decoys. Flyers sway side to side, mimicking birds locking up and dropping in. Each kit includes a solid steel pole and a bouncer arm, both made in the USA. The movement is simple and realistic.
Built to Match Your Hunt
Flyers mount in a high or low position. The high slot is the top hole opposite the crimped end. It works for most setups. The low slot is welded 18 inches above the crimped end. It helps in strong winds, overnight sets, or field hunts. It’s built for dry ground but works in shallow water. Snow goose rig hunters benefit from the low slot. At night, drop flyers to the low position to protect wing spars if the pole tips in wind or when frost breaks loose.
Add a second bouncer arm. Run one flyer high and one low. This simulates a pair landing together. It works only in fields or shallow water. For water deeper than 12 inches, use a separate pole kit for each flyer. Poles come in 4, 6, or 8-foot lengths. The base is 4 feet. Each extension adds about 22 inches. Six-foot kits have one extension. Eight-foot kits have two. Use the same height or mix them. This creates the look of birds landing.
Drive It Deep, Pack It Easy
Frozen or hard ground makes setup tough. The Flyer Pole Kit Driver solves that. It drives poles deep without flaring the ends. No hammer needed. It’s compact and powder-coated red. It fits inside the zippered pocket of the new Deadly Decoys® Flyer Decoy Bag, coming Fall 2025.
Flyer Pole Kit
Easy to Use
(Unless You Overthink It)
Bring Flyers To Life
_________________________________________________________________________________________________________













